LaRue Quad Rail Handguard

LaRue Tactical 7.0″ Handguard LT15-7
Ideal for a replacement for carbine-length rifles using standard front sight bases. The 7.0’s length stops just short of a carbine-length gas block, providing true free-float. Our two-pin proprietary barrel nut system with its locking anti-slip plate, sets LaRue handguards apart from the competition. Once properly installed, there is no chance of movement whatsoever. The side and bottom rails are tucked closer to the barrel, keeping the profile narrower and more streamlined. LaRue handguards also include integral QD sling-swivel sockets at the base of each side for convenient mounting 2-point slings. Additionally, our Free-float Rail system provides an excellent heat-sinking feature that pulls throat-damaging heat away from the chamber area. Another heat-sinking benefit is the elimination of pressure-spikes, which some feel is the cause of a large part of pre-mature bolt failures.

Weight: .742 lb

LaRue Tactical 9.0″ Handguard LT15-9
Excellent choice for short rifles in the 10″-16″ range. The 9.0’s length stops just past a carbine-length gas block, providing true free-float. Our two-pin proprietary barrel nut system with its locking anti-slip plate, sets LaRue handguards apart from the competition. Once properly installed, there is no chance of movement whatsoever. The side and bottom rails are tucked closer to the barrel, keeping the profile narrower and more streamlined. LaRue handguards also include integral QD sling-swivel sockets at the base of each side for convenient mounting 2-point slings. Additionally, our Free-float Rail system provides an excellent heat-sinking feature that pulls throat-damaging heat away from the chamber area. Another heat-sinking benefit is the elimination of pressure-spikes, which some feel is the cause of a large part of pre-mature bolt failures.

Weight: .854lb

LaRue Tactical 10″ Handguard LT15-10
Ideal for carbine-length rifles in the 11.5 to 16″ range. The 10.0’s length stops about an inch past of a carbine-length gas block, providing true free-float. Our two-pin proprietary barrel nut system with its locking anti-slip plate, sets LaRue handguards apart from the competition. Once properly installed, there is no chance of movement whatsoever. The side and bottom rails are tucked closer to the barrel, keeping the profile narrower and more streamlined. LaRue handguards also include integral QD sling-swivel sockets at the base of each side for convenient mounting 2-point slings. Additionally, our Free-float Rail system provides an excellent heat-sinking feature that pulls throat-damaging heat away from the chamber area. Another heat-sinking benefit is the elimination of pressure-spikes, which some feel is the cause of a large part of pre-mature bolt failures.

Weight: .92lb

LaRue Tactical 11″ Handguard LT15-11FL
Ideal for rifles in the 16″ range. The 11.0’s length stops just past mid-length gas blocks providing true free-float. Our two-pin proprietary barrel nut system with its locking anti-slip plate, sets LaRue handguards apart from the competition. Once properly installed, there is no chance of movement whatsoever. The side and bottom rails are tucked closer to the barrel, keeping the profile narrower and more streamlined. LaRue handguards also include integral QD sling-swivel sockets at the base of each side for convenient mounting 2-point slings. Additionally, our Free-float Rail system provides an excellent heat-sinking feature that pulls throat-damaging heat away from the chamber area. Another heat-sinking benefit is the elimination of pressure-spikes, which some feel is the cause of a large part of pre-mature bolt failures. Note: Max clearance inside the handguard is 1.15″. Any gas block that has a diameter larger than 1.15″ will not fit in the handguard. The gas tube port on the gas block is not a factor in clearance.

Weight: .992lb

LaRue Tactical 11″ Handguard SBRS (Gooseneck) LT15-11
Developed to accommodate more upper rail-space over 10.5″ to 12″ barrels, while still providing access to special flash hiders and silencers under 1.25″ in diameter. This is the only rail that allows the proper placement of Aimpoint M2, PEQ-2A and front flip-up sight over a 10.5″ barrel. The side and bottom rails cover carbine-length gas blocks, and provide true free-float. Our two-pin proprietary barrel nut system with its locking anti-slip plate, sets LaRue handguards apart from the competition. Once properly installed, there is no chance of movement whatsoever. The side and bottom rails are tucked closer to the barrel, keeping the profile narrower and more streamlined. LaRue handguards also include integral QD sling-swivel sockets at the base of each side for convenient mounting 2-point slings. Additionally, our Free-float Rail system provides an excellent heat-sinking feature that pulls throat-damaging heat away from the chamber area. Another heat-sinking benefit is the elimination of pressure-spikes, which some feel is the cause of a large part of pre-mature bolt failures.

Weight: .912lb

LaRue Tactical 13.2 Handguard LT15-13.2
Ideal for 16″-20″ barreled uppers that need maximum rail space. The 13.2’s length covers all gas blocks, including full-lengths, providing true free-float. Our two-pin proprietary barrel nut system with its locking anti-slip plate, sets LaRue handguards apart from the competition. Once properly installed, there is no chance of movement whatsoever. The side and bottom rails are tucked closer to the barrel, keeping the profile narrower and more streamlined. LaRue handguards also include integral QD sling-swivel sockets at the base of each side for convenient mounting 2-point slings. Additionally, our Free-float Rail system provides an excellent heat-sinking feature that pulls throat-damaging heat away from the chamber area. Another heat-sinking benefit is the elimination of pressure-spikes, which some feel is the cause of a large part of pre-mature bolt failures.

Weight: 1.132lb

LaRue Quad Rail Free-Floating Handguard with LaRue Locking System.

• CNC-machined out of aluminum
• Integral QD sling-swivel sockets on both sides
• Hard coat anodized, with T-Numbers
• Low-profile bottom and side rails
• Special rail cuts allow both mil-issue and standard rail covers