6mm MAX SOLWG RIFLE

At Sons of Liberty Gun Works we believe in Quality Mil-Spec or better parts. We believe there is no substitute for quality and that your gun should be built right the first time, ready for hard use right out of the box. We believe a quality Bolt Carrier Group and a quality, accurate and long lasting barrel are the heart of a Combat Grade weapon. We believe in properly tuned weapons using the correct gas system length and quality buffer system components such as the Vltor A5 system and Sprinco Tactical Buffer Springs. We believe in our products and we back them up with a Lifetime Warranty. Our weapons our meant to be used hard and go in harm’s way, they won’t let you down.

All rifles are test fired twice in shop to ensure proper function.

The 6mm MAX can do this within the constraints of the AR-15, and function flawlessly.  So the end result is that the 6mm MAX can push bullets 55 gr to 100 gr, and do it with the same 2.30 OAL.  Some designs have emerged shorter and fatter to accommodate a bullet with better BC and enough powder for useful velocities.  When comparing the water capacity of 24 Nosler (29 grs), 6.8 SPC (35 grs), 5.56 x45 NATO (28.5 grs), 6×45 (29 grs), 6 ARC (34 grs), 6.5 Grendel (35 grs), .224 Valkyrie (34.5 grs), and what do we get?  For the cartridges with .378 case head, powder capacity is less than the 6mm MAX.  For the cartridges with larger case heads, you get the same amount of powder or less than the 6mm MAX.  The end result is that the 6mm MAX (35 grs) allows for a .378 mil-spec bolt face with full lug integrity and powder to push the heavies at useful velocities.

Barrel: Sons of Liberty Gun Works 10.5” 4150CoMOV 1:7 MPI HPT Barrel
Caliber: 5.56 NATO Chamber
Barrel Steel: 4150 CrMoV (Chrome Moly Vanadium per MIL-B-11595E)
Twist Rate: 1/7 Twist Six Groove
Thread Pitch: 1/2-28 Threaded Muzzle
Gas Block: .750″ Gas Block Journal with an appropriately sized gas port
Weight: 27 Ounces
Barrel Finish: QPQ Corrosion Resistant Finish
Barrel Extension: QPQ coated M4 Feed Ramp Extension
High Pressure (proof) Tested (HPT)
Magnetic Particle Inspected (MPI)

Lower Receiver: Sons of Liberty Gun Works Forged Lower Receiver – Receiver design will vary
Material: Made from Mil-Spec 7075-T6 aluminum forgings
Finish: Anodized to Mil-Spec MIL-A-8625F, Type III, Class 2, Hard Anodic Coating, Flat Black Dye, Non-Reflective, NiAc Seal
Contour is fully machined leaving no flash marks from the forging.
All lowers are cut with M16 auto pocket.
Safe, Fire, and Full Auto Pictograms.

Buffer System: Intermediate (A5) Buffer System designed to improve reliability while creating a smoother operating cycle.
Receiver Extension: Intermediate Receiver Extension Tube made from 7075-T6 Aluminum
Buffer: A5H2 or EH-1 Buffer
Buffer Spring: Sprinco Green Rifle Length Spring
Receiver end plate: QD Mil-Spec with properly staked Castle Nut

Fire Control Group: Sons of Liberty Gun Works Liberty Fighting Trigger (LFT) with consistent 5.5lb pull.

Safety Selector:
Sons of Liberty Gun Works Selector

Grip: B5 Systems Grip – Black

Stock: SBA3 Pistol Brace

Upper Receiver:
Material: Made from Mil-Spec 7075-T6 aluminum forgings.
Exterior Finish: Anodized to Mil-Spec MIL-A-8625F, Type III, Class 2, Hard Anodic Coating, Flat Black Dye, Non-Reflective, NiAc Seal
Interior Finish:Anodized to Mil-Spec MIL-A-8625F, Type III, Class 2, Hard Anodic Coating, Flat Black Dye, Non-Reflective, NiAc Seal
T-Marks: Engraved T-Marks

Charging Handle: Raptor Ambi -LT

Gas Block: Sons of Liberty Lo-Pro Gas block made from 4140 Steel and Nitride Treated with Knurled Head Set Screws

Gas Tube: Sons of Liberty Standard Mid Length Melonited Stainless Steel

Rail System: Sons of Liberty Gun Works M76 Wedge Lock
Weight: 13 OZ

Muzzle Device: A2 Flash Hider

Sights: None

Includes: Allen TacticalSoft Case, Three SOLGW 30rd Mags, SOLGW Sticker & Patch, copy of the US Constitution, Steel M-LOK QD Socket and LIFETIME Warranty Certificate